Marrie L. 
There are many horror stories of bad painters and the problems that were caused by poor results. Bad paint work can be disappointing on many levels.
It looks horrible and serves as a reminder of how much you paid for something else. A bad paint job won’t protect your surfaces and your paint will not provide the protection you need. Bad paint has no staying power so you will have to spend more money to get another job.
Bad exterior and interior paint jobs are the main causes
The most common mistake in exterior and interior painting is when the painter skips important steps. They want to finish the job quickly so they can get on with the next. Quality painters care more about the end result than hurrying through a job to finish it. These rushed jobs can be seen and will require costly rework.
Painters do not prepare surfaces correctly
Some painters do not properly prepare surfaces for paint or primer, whether it is because they are inexperienced or simply skip steps. Trusted house painters in Auckland use a variety to prepare interior and exterior surfaces. Below are the details:
Preparation for interior painting in the building
Professional painters will clean up any dirt, grime, or dust that may remain after furniture, fixtures, wall hangings, and other obstructions are removed. Any residue will cause paint to bubble, crack, or chip if it is not adhered to the surface.
Preparation for exterior painting
There are many different types of exterior materials, including brick, stucco, wood and stucco. This means that the preparation process will vary depending on which property you have. One thing is common: they must be free of all debris before they can be painted or primed. In many cases, pressure washing the surface ensures that no debris is left behind. It is important that the surfaces are allowed to dry completely.
Unskilled painters often rush to finish projects and fail to prepare surfaces properly. Make sure you hire a contractor who takes the time necessary to complete each step before painting.
Painters use the wrong paint types in the wrong places.
What happens to paint that isn’t good? This is a good question because many painting contractors (the poor ones) will cut corners on paints to make more money or charge less. You’ll pay more if the painter uses inferior products. Sometimes, paint can be thinned to make it last longer. Paint thinners have their place, but bad painters won’t do it for the money. The end result is often poor quality.
Paintings are done in adverse weather conditions
A strict set of guidelines is followed by quality painters to know when they can and cannot paint. Oil-based paints are best used at temperatures between 40 to 90 degrees. Latex paint works best between 50 and 85 degrees. If these rules are not followed, poorly cured paint will result in paint that doesn’t adhere properly. It is important not to apply paint when the air is too dry or too humid.
Lack of high-quality finishes, and unskilled painters
There are many variables that go into a high-quality finish. These variables are often overlooked or not recognized by skilled painters, leading to poor results. The unskilled painter fails to follow these crucial steps, which can lead to poor results.
Hire only a contractor who has a track record to avoid poor painting. Hire a professional who has a lot of examples of their exterior and interior work , and references that show their attention to detail and quality.
Marrie L.